Focus on the development and production progressive cavity pump

T E L:  0086 18942424342

Transcendendence and Innovation
Strving progressive cavity pump industry leading brand

Standard progressive cavity pump

Transcendence and Innovation
Strving progressive cavity pump industry-leading brand

Standard progressive cavity pump

standard PC pump

Item Number: SN01-SN12

Dimensions:L:150mm–550mm 

Weight:

Recommended Fluid Viscosity:0-6000000cps

Motor max(rpm)/min/:0-120rpm/min

Maximal dosing quantity/min:

Material Stator:FFKM FKM EPDM HNBR

Material Screw:SUS304 SUS306 AL

Motor:German   SEW motor

Standard SN series direct coupling type screw industrial application pump

Brief introduction

Standard SN series Progressing Cavity Pumps can be used in any area of industry(Environmental technology, Foods, Chemicals and Oil), where a great variety of different substances must be pumped or very precisely dosed. From low viscosity media to products barely capable of flowing,With or without solid content, shear-sensitive, sticky or abrasive. Suchas wastewater, activated sludge, plaster and cement mortar, acids, lime water, emulsion paints, soaps, adhesives, etc.– with the Standard SN ,Especially suitable for oil and water separators, plate frame filter press and other equipment.
The Standard series screw pump is flange connection reducer motor direct-linked structure,which is compact and economical. Standard Series screw pump is known for its use and maintenance cost concessions.
Contact us, we can also help you according to your request to develop the exclusive best solution.

Features of the Standard SN series Progressing Cavity Pump

(1). Continuous low pulsation transmission, not affected by pressure and viscosity fluctuation
(2). The conveying capacity is proportional to the rotational speed, and can be measured with high precision in the whole speed range
(3). High pressure without pulsating transmission
(4). Mechanical seals directly under the pump cavity entrance, in a variety of applications without external flush seal
(5). Short drive shaft and straight-connected frame make the mechanical seal installation stability High
(6). Flange bearing and pump seat separation structure to facilitate the replacement of the stator

Advantages of the Standard SN Progressing Cavity Pump

(1). Variable Modular System
(2). Different rotor/stator geometry and wide range of materials used
(3). Durable compact direct-linked structure
(4). Standard mechanical seals, other sealing methods optional
(5). Smooth conveying Medium
(6). The pump connection conforms to the domestic and the international standard, specially designs the module
(7). Easy to clean, easy to maintain

The Standard SN Progressing Cavity Pump is available

(1). The maximum flow can reach 400m3
(2). maximum pressure up to 24bar
(3). Using different materials, from steel to nickel-chrome to high acid-resistant materials such as double steel, HA alloy and titanium alloy
(4). Different stator rubber, from high abrasion resistance natural rubber to oil, acid and alkali-resistant rubber to EPDM, fluorine rubber and whole fluorine
(5). Different mechanical shaft seals, packing gland and special seals

 

Excellent construction system of straight-linked single screw pump

(1). Rotor: abrasion resistance, corrosion resistance design
(2). Stator: Tube vulcanization, both ends sealed, using a variety of rubber, plastic and metal materials.
(3). Connecting ROD: coupling rod with twouniversal joint transmits the power from the driving device to the rotor.
(4). Shaft sleeve: The standard structure is a single end face, can be positive and negative rotating, wear-resistant mechanical seals. According to user requirements, can also be used by different manufacturers to provide different types of single/double end mechanical seals, assembly and other special sealing, and packing seals
(5). Suction chamber and discharge body: flange and thread connection conform to international standards. Materials are cast iron, carbon steel, stainless steel and according to customer requirements for the use of special materials.
(6). Straight-connected structure: The driving device is directly connected with the flange to the straight frame, the structure is compact, the total weight is small, has the fixed axial height, it is not related to the type and size of the drive device, and the maintenance is simple and efficient.
(7). Universal joint: Standard Screw pump has a standard universal joint to ensure operational reliability and life cycle.
(8). Bracket: independent support foot; Rod; Simplifies assembly and maintenance procedures
(9). Sew Reducer Motor: The standard-equipped reducer motor for the screw pump is a German SEW or NORD, which can also match customer requirements.

The maintenance of vulnerable parts

(1). Rotor and stator
The wear rate of the two components is related to many factors, such as the wear characteristics, rotational speed and pressure of the pumping material. When the pump performance is reduced to meet the requirements, the stator and rotor should be replaced with a component or two simultaneous replacement.
(2). Drive Shaft
The wear rate of the filler contact surface depends on many factors, such as the abrasion and rotational speed of the medium. Constant maintenance of filler can maximize the service life of the pump shaft. When shaft seals fail, the shafts and fillers need to be replaced at the same time.
(3). Connecting rod Assembly
Regular maintenance and lubrication can maximize the service life of the connecting parts. When the parts appear obvious wear and tear, should replace the connecting parts connecting the component, if necessary, can replace the whole shaft

Quality Assurance

Standard is a professional R & D and manufacturer of single screw pump and the spare parts, product quality was inspected and approved by customers in professional market, has won customer’s recognition and highly praise.

Standard Universal Parts overview

Standard has a reputation for quality in both equipment and parts. Over recent years it has been our mission to use our manufacturing and engineering expertise to expand our product offering to include a range of high quality Standard Universal Parts, suitable for many other brands of progressing cavity (PC) pumps.

International excellent brand screw pump parts supply

Standard use their own expertise, manufacturing capabilities and channels to provide the world’s major brands ( NE – – – – – , SE – – – – , MO – – , VIS — – – – , STANDARD, etc ) a full range of screw pump parts, these accessories performance is good, rugged, durable, including: stator, rotor, transmission shaft, joint shaft, PIN, or a complete set of rotating parts, etc.

CERTIFICATION

FAQ

1) What products does Standard offer ?

Standard offers screw pump, Screw pump accessories, and the global solution of the fluid system product.
The product range summary of Standard
Progressive cavity pumps for conveying and metering low to highly viscous media with or without solids
Macerators for macerating solid and fibrous components in the medium
Control systems for monitoring, regulating and controlling processes
Services: consulting, commissioning, maintenance, NE – – – – – , SE – – – – , MO – – , VIS – – – – – , etc Universal Spare parts, repairs and various service contract

2) Does Standard supply custom-made pumps ?

Yes, this is our specialty, we customize different design and material combinations for each application’s modular system. This means that we develop the best technology and the most economical solution for your needs

3) Can Standard spare parts be ordered online ?

Yes, Standard screw pumps and spare parts as well as other brands Universal accessories can be ordered online. For order please contact us ( WhatsApp/ Wechat/ Telephone: 0086 -189 4242 4342 )

4) How fast can my Standard pump be delivered ?

Normally, standard pumps are delivered in 2 to 5 weeks. In urgent cases, delivery times between 2 to 5 days may be possible. Please contact us ( WhatsApp/ Wechat/ Telephone: 0086 -189 4242 4342 )

5) Product quality guarantee

According to the International standards, Pump 1 year warranty, spare parts 6 months warranty

Buyers Attention

(1). Are Standard pumps allowed to run dry ?

No, the conveying elements are permanently in contact with one another, which means that dry running must be avoided in progressive cavity pumps. The Standard dry-running protection device offers reliable protection.

(2). At what temperatures can Standard pumps be used ?

Standard progressive cavity pumps can be used at temperatures from 0 °C to 90° C.

Why choose us ?

(1). Factory Direct Sales, no intermediate links, competitive price

(2). Our machines are imported from Europe, the original machine factory, the production of stable product quality, do not use low quality equipment.

(3). Ensure on-time delivery, we can provide the best quality of service control, transportation, documentation and so on.

(4). We provide samples and OEM services.

(5). We will reply to your enquiry within 24 hours.

(6). More than 20 years of experience in this industry business, and professional team, so that our customers feel relaxed and comfortable working with us in

(7). Please contact us by email and we will send you more information.

How to make an order for Standard pump ?

(1). Sample approval

(2). Client arrange 30-50% deposit after receiving our PI (pro forma invoice)

(3). We start bulk production and finish production within agreed lead time

(4). We send product photo and shipping documents to client

(5). Client arrange balance payment

(6). We arrange the delivery, and send original documents or telex release the goods

Related

Adhesive pump

Drum pump emptying systems

Vertical dosing drum pump

Coating pump

Hygienic pump

Hopper pump

Standard progressing cavity pump

STD-NE-SE-MO-Spare Parts

Request a Qoute

Use this contact form to get in touch with us.